Cha Lefs 4010. CHAMELEON ANTENNA CHA LEFS 8010 Lightweight End Fed Halfwave Sloper Page 10: Sloper Installation Sloper Installation Use the following procedure to install the CHA LEFS 4010 Sloper configuration. The sturdy line winder with integral high-efficiency impedance matching network transformer, ultra-thin 20 gauge PTFE antenna KEVLAR wire and 50 feet of lightweight Micro 90 paracord enables highly portable six band operation without the extra bulk of an antenna tuner.
Cha Lefs PDF from www.scribd.com
To use the CHA LEFS 4010 as a dipole, connect the set of Antenna Wires to the wing nut connections on the End Assembly marked "DIPOLE" and connect the Coaxial Cable to the BNC Coaxial Connector marked "DIPOLE" 1 X CHA LEFS (≈ 19.8 meter (65′) long - 0.9mm (20 Gauge) Tinned Copper PTFE (Teflon) (-70°C to 150°C) wire) 1 X OD Pouch;
Cha Lefs PDF
This antenna operates across 40, 20, 15, 10 meters. Operation on 40/20/15/10 m without tuner; Very light, small transport size; Download. The sturdy line winder with integral high-efficiency impedance matching network transformer, ultra-thin 20 gauge PTFE antenna KEVLAR wire and 50 feet of lightweight Micro 90 paracord enables highly portable six band operation without the extra bulk of an antenna tuner.
CHAMELEON ANTENNA CHALEFS8010 Chameleon Antenna Lightweight 8010 End. This antenna operates across four bands - 40, 20, 15, and 10 meters - in the Amateur Radio Service (ham), expanding to seven bands with a tuner To use the CHA LEFS 4010 as a dipole, connect the set of Antenna Wires to the wing nut connections on the End Assembly marked "DIPOLE" and connect the Coaxial Cable to the BNC Coaxial Connector marked "DIPOLE"
CHAVE SETA SCANIA SERIE 4 C PILOTO AUTOMATIC LEFS 0104009 405311. Page 10: Sloper Installation Sloper Installation Use the following procedure to install the CHA LEFS 4010 Sloper configuration. The matching transformer is a 1:49 UnUn, which is mounted on a practical winder/rewinder and protected from the.